You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Taxonomy

PetroWiki
Jump to navigation Jump to search

Well drilling

1 Well drilling
1.1 Well planning
1.1.1 Well site preparation
1.1.2 Authority for expenditures
1.1.3 Trajectory design
1.2 Wellbore design
1.2.1 Wellbore integrity
1.2.2 Geomechanics
1.2.3 Rock properties
1.3 Wellhead design
1.3.1 Surface wellheads
1.3.2 Subsea wellheads
1.3.3 Wellhead integrity
Back to top
1.4 Drillstring design
1.4.1 Bha design
1.4.2 Drill pipe selection
1.4.3 Torque and drag analysis
1.4.4 Drillstring dynamics
1.4.5 Hole openers and under-reamers
1.5 Drill bits
1.5.1 Bit design
1.5.2 Bit rock interactions
1.5.3 Drill bit materials
1.5.4 Bit hydraulics
1.6 Drilling operations
1.6.1 Drilling operation management
1.6.2 Technical limit drilling
1.6.3 Drilling optimization
1.6.4 Equipment integrity, failure analysis
1.6.5 Drilling time analysis
1.6.6 Drilling automation
1.6.7 Directional drilling
1.6.8 Geosteering or reservoir navigation
1.6.9 Through tubing rotary drilling
1.6.10 Coring, fishing
1.6.11 Running and setting casing
1.6.12 Plugging and abandonment
Back to top
1.7 Pressure management
1.7.1 Underbalanced drilling
1.7.2 Managed pressure drilling
1.7.3 Dual gradient drilling
1.7.4 Pressure effects in drilling
1.7.5 Well control
1.7.6 Wellbore pressure management
1.8 Formation damage
1.8.1 Rock - fluid incompatibility
1.8.2 Fluid - fluid incompatibility
1.8.3 Fines invasion
1.8.4 Biological activity
1.8.5 Phase trapping
1.9 Wellbore positioning
1.9.1 Surveying and survey programs
1.9.2 Survey calculations and error models
1.9.3 Anti-collision analysis
1.9.4 Survey tools
1.9.5 Ranging tools and proximity calculation
Back to top
1.10 Drilling equipment
1.10.1 Drill string components and drilling tools
1.10.2 Directional drilling systems and equipment
1.10.3 Well control equipment
1.10.4 Onshore drilling units
1.10.5 Offshore drilling units
1.11 Drilling fluids and materials
1.11.1 Fluid mechanics for drilling
1.11.2 Drilling fluid selection and formulation
1.11.3 Drilling fluid management and disposal
1.11.4 Solids control
1.11.5 Drilling hydraulics
1.11.6 Hpht hydraulics
1.11.7 Cuttings transport
1.11.8 Drilling fluid property measurement
Back to top
1.12 Drilling measurement, data acquisition and automation
1.12.1 Measurement while drilling
1.12.2 Logging while drilling
1.12.3 Mud logging or surface measurements
1.12.4 Real time data transmission
1.12.5 Drilling data management
1.13 Casing and cementing
1.13.1 Casing design
1.13.2 Casing material selection
1.13.3 Cement formulation
1.13.4 Cement and bond evaluation
1.14 Fundamental research in drilling
Back to top

Well completions

2 Well completion
2.1 Completion operations
2.1.1 Perforating
2.1.2 Fluid loss control
2.1.3 Sand/solids control
2.1.4 Screen selection
2.1.5 Gravel pack design and evaluation
2.1.6 Frac and pack
2.1.7 Deepwater completions
2.2 Production string design and installation
2.2.1 Tubular optimization
2.2.2 Downhole tools and equipment
Back to top
2.3 Well monitoring systems or intelligent wells
2.3.1 Remote monitoring
2.3.2 Downhole sensors and control equipment
2.3.3 Inflow control equipment
2.3.4 Real-time optimization
2.3.5 Completion data management
2.4 Completion fluids and materials
2.4.1 Completion fluids
2.4.2 Proppants
2.5 Hydraulic fracturing
2.5.1 Fracture design and containment
2.5.2 Fracturing materials
2.5.3 Fracturing equipment
2.5.4 Multistage fracturing
2.6 Fundamental research in well completion
Back to top

Production and well operations

3 Production and well operations
3.1 artificial lift systems
3.1.1 Beam and related pumping techniques
3.1.2 Electric submersible pumps
3.1.3 Hydraulic and jet pumps
3.1.4 Hybrid lift technologies
3.1.5 Plunger lift
3.1.6 Gas lift
3.1.7 Progressing cavity pumps
3.1.8 Gas well deliquification
3.2 Well operations, optimization and stimulation
3.2.1 Well candidate recognition
3.2.2 Downhole intervention and remediation
3.2.3 Hydraulic fracturing design, implementation and optimization
3.2.4 Acidizing
3.2.5 Produced sand or solids management and control
3.2.6 Produced water management and control
3.2.7 Downhole fluids separation, management and disposal
3.2.8 Well performance modeling and tubular optimization
3.2.9 Lifecycle management and planning
Back to top
3.3 Well and reservoir surveillance and monitoring
3.3.1 Production logging
3.3.2 Borehole imaging and wellbore seismic
3.3.3 Downhole and wellsite flow metering
3.3.4 Downhole monitoring and control
3.3.5 Production data management
3.3.6 Integrated modeling
3.4 Production chemistry, metallurgy and biology
3.4.1 Inhibition and remediation of hydrates, scale, paraffin or wax and asphaltene
3.4.2 Well fluid analysis
3.4.3 Corrosion inhibition and management
3.4.4 Downhole chemical treatments and fluid compatibility
3.4.5 Bacterial contamination and control
3.5 Well decommissioning and site remediation
3.6 Fundamental research in production and operations
Back to top

Facilities design, construction and operation

4 Facilities design, construction and operation
4.1 Processing systems and design
4.1.1 Process simulation
4.1.2 Separation and treating
4.1.3 Dehydration
4.1.4 Gas processing
4.1.5 Processing equipment
4.1.6 Compressors, engines and turbines
4.1.7 Electrical systems
4.1.8 Heavy oil upgrading
4.1.9 Tanks and storage systems
4.1.10 Integrated reservoir surface systems
4.1.11 Human factors engineering
4.1.12 Hse considerations in facilities design
Back to top
4.2 Pipelines, flowlines and risers
4.2.1 Piping design and simulation
4.2.2 Pipeline transient behavior
4.2.3 Materials and corrosion
4.2.4 Risers
4.2.5 Offshore pipelines
4.3 Flow assurance
4.3.1 Hydrates
4.3.2 Precipitates
4.3.3 Solids
Back to top
4.4 Measurement and control
4.4.1 Process control and automation
4.4.2 Scads
4.4.3 Multiphase measurement
4.4.4 Pipeline leak detection
4.4.5 Facilities data management
4.5 Offshore facilities and subsea systems
4.5.1 Siting, assessment of hazards
4.5.2 Platform design
4.5.3 Floating production systems
4.5.4 Mooring systems
4.5.5 Installation equipment and techniques
4.5.6 Subsea production equipment
4.5.7 Controls and umbilicals
4.5.8 Flow assurance in subsea systems
4.5.9 Subsea processing
4.5.10 Remotely operated vehicles
Back to top
4.6 Natural gas conversion and storage
4.6.1 Compressed natural gas
4.6.2 Liquified natural gas
4.6.3 Gas to liquids
4.6.4 Gas storage facility design
4.6.5 Gas storage facility operation
4.7 Unconventional production facilities
4.7.1 Oil sand, shale, bitumen
4.7.2 Co2 capture and management
4.8 Facilities and construction project management
4.8.1 Onshore projects planning and execution
4.8.2 Offshore projects planning and execution
4.8.3 Onshore construction management
4.8.4 Offshore construction management
4.8.5 Cost estimation and control
4.8.6 Contracting, procurement, and administration
4.8.7 Project management performance
4.8.8 She considerations in facilities construction
Back to top
4.9 Facilities operations
4.9.1 Operating procedures
4.9.2 Commissioning and startup
4.9.3 Pipeline pigging
4.9.4 Facility integrity management
4.10 Facilities decommissioning and site remediation
4.10.1 Land facility decommissioning
4.10.2 Offshore facility decommissioning
4.11 Fundamental research in facilities design, construction and operation
4.11.1 Corrosion research
Back to top

Reservoir description and dynamics

5 Reservoir description and dynamics
5.1 Reservoir characterization
5.1.1 Exploration, development, structural geology
5.1.2 Faults and fracture characterization
5.1.3 Sedimentology
5.1.4 Petrology
5.1.5 Geologic modeling
5.1.6 Near-well and vertical seismic profiles
5.1.7 Seismic processing and interpretation
5.1.8 Seismic modeling
5.1.9 Four-dimensional and four-component seismic
5.1.10 Reservoir geomechanics
Back to top
5.2 Fluid characterization
5.2.1 Phase behavior and pvt measurements
5.2.2 Fluid modeling, equations of state
5.2.3 Geochemical characterization
5.3 Reservoir fluid dynamics
5.3.1 Flow in porous media
5.3.2 Multi-phase flow
5.3.3 Particle transportation
5.3.4 Integration of geomechanics in models
5.4 Improved and enhanced recovery
5.4.1 Waterflooding
5.4.2 Gas-injection methods
5.4.3 Gas cycling
5.4.4 Reduction of residual oil saturation
5.4.5 Conformance improvement
5.4.6 Thermal methods
5.4.7 Chemical flooding methods
5.4.8 Steam-solvent combination methods
5.4.9 Miscible methods
5.4.10 Microbial methods
5.4.11 Cold heavy oil production
5.5 Reservoir simulation
5.5.1 Simulator development
5.5.2 Construction of static models
5.5.3 Scaling methods
5.5.4 Visualization technologies
5.5.5 Evaluation of uncertainties
5.5.6 Dynamic model update algorithms
5.5.7 Streamline simulation
5.5.8 History matching
Back to top
5.6 Formation evaluation and management
5.6.1 Open hole/cased hole log analysis
5.6.2 Core analysis
5.6.3 Pressure transient analysis
5.6.4 Drillstem/well testing
5.6.5 Tracer test analysis
5.6.6 Cross-well tomography
5.6.7 Formation test analysis
5.6.8 Well performance, inflow performance
5.6.9 Production forecasting
5.6.10 Seismic monitoring
5.6.11 Reservoir monitoring with permanent sensors
5.7 Reserves evaluation
5.7.1 Estimates of resource in place
5.7.2 Recovery factors
5.7.3 Deterministic methods
5.7.4 Probabilistic methods
5.7.5 Economic evaluations
5.7.6 Reserves classification
Back to top
5.8 Unconventional and complex reservoirs
5.8.1 Tight gas
5.8.2 Shale gas
5.8.3 Coal seam gas
5.8.4 Shale oil
5.8.5 Oil sand, oil shale, bitumen
5.8.6 Naturally-fractured reservoirs
5.8.7 Carbonate reservoirs
5.8.8 Gas-condensate reservoirs
5.8.9 Hp or ht reservoirs
5.9 Non-traditional resources
5.9.1 Gas hydrates
5.9.2 Geothermal resources
5.10 Storage reservoir engineering
5.10.1 Co2 capture and sequestration
5.10.2 Natural gas storage
5.11 Fundamental research in reservoir description and dynamics
Back to top

Health, safety, security, environment and social responsibility

6 Health, safety, security, environment and social responsibility
6.1 Hsse and social responsibility management
6.1.1 Hsse management systems
6.1.2 Hsse reporting
6.1.3 Hsse audit and certification
6.1.4 Hsse standards, regulations and codes
6.1.5 Human resources, competence and training
6.1.6 Contingency planning and emergency response
6.2 Health
6.2.1 Strategic health management
6.2.2 Health impact assessment
6.2.3 Exposure assessment
6.2.4 Industrial hygiene
6.2.5 Community health outreach
6.2.6 Infectious diseases
6.2.7 Noise, chemicals, and other workplace hazards
6.2.8 Ergonomics
Back to top
6.3 Safety
6.3.1 Human factors
6.3.2 Safety in design and engineering
6.3.3 Operational safety
6.3.4 Transportation safety
6.3.5 Process safety
6.3.6 Chemical use and storage
6.3.7 Safety risk management
6.4 Security
6.4.1 Facility vulnerability assessment
6.4.2 Security of operating facilities
6.4.3 Data and communications security
Back to top
6.5 Environment
6.5.1 Air emissions
6.5.2 Water use, produced water discharge and disposal
6.5.3 Waste management
6.5.4 Naturally occurring radioactive materials
6.5.5 Oil and chemical spills
6.5.6 Remediation and land reclamation
6.5.7 Climate change
6.6 Sustainability or social responsibility
6.6.1 Integrating hsse into the business
6.6.2 Environmental and social impact assessments
6.6.3 Social responsibility and development
6.6.4 Sustainable development
6.6.5 Community outreach
6.6.6 Partnership and communication
6.7 Fundamental research in hsse
Back to top

Management and information

7 Management and information
7.1 Asset and portfolio management
7.1.1 Reserves replacement, booking and auditing
7.1.2 Reserves accounting for non-traditional reservoirs
7.1.3 Economic analysis guidelines
7.1.4 Acquisition and divestiture
7.1.5 Portfolio analysis, management and optimization
7.1.6 Field development optimization and planning
7.1.7 Integrated asset modeling
7.1.8 Asset integrity
7.1.9 Project economics or valuation
7.1.10 Capital budgeting and project selection
Back to top
7.2 Risk management and decision-making
7.2.1 Risk, uncertainty, and risk assessment
7.2.2 Risk management systems
7.2.3 Decision-making processes
7.2.4 Statistical techniques for managing risk
7.2.5 Emergency preparedness and training
7.3 Strategic planning and management
7.31 Exploration and appraisal strategies
7.3.2 Benchmarking and performance indicators
7.3.3 Project management
Back to top
7.4 Energy economics
7.4.1 Resource potential and evaluation
7.4.2 Unconventional resource economics
7.4.3 Market analysis or supply and demand forecasting or pricing
7.4.4 Energy policy and regulation
7.4.5 Future of energy, oil and gas
7.4.6 Statistical techniques for energy economics
7.5 Professionalism, training, and education
7.5.1 Ethics
7.5.2 Personnel competence
7.5.3 Professional registration or certification
7.5.4 University curricula
7.5.5 Communities of practice
Back to top
7.6 Information management and systems
7.6.1 Knowledge management
7.6.2 Data integration
7.6.3 Data security
7.6.4 Data mining
7.6.5 Metadata management
7.6.6 Artificial intelligence
7.6.7 Neural networks
7.7 Research and development and emerging technology programs
7.7.1 New technology deployment
7.7.2 New technology valuation
7.7.3 New technology funding
Back to top