You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Remotely operated vehicles (ROVs): Difference between revisions

PetroWiki
Jump to navigation Jump to search
No edit summary
 
No edit summary
 
Line 1: Line 1:
Remotely operated vehicles (ROVs) have facilitated the development of oil and gas resources in deeper water. By enabling access to areas that divers could not safely reach, they have extended capabilities for handling more complex situations and operations in deeper water.
Remotely operated vehicles (ROVs) have facilitated the development of oil and gas resources in deeper water. By enabling access to areas that divers could not safely reach, they have extended capabilities for handling more complex situations and operations in deeper water.
 
== History ==


==History==
In the 1980s, divers used saturated and pressurized systems to do almost all well and subsea equipment intervention, inspection, and repair. If the divers could not complete the repair task and/or inspection, the blowout preventer (BOP) stack or other items had to be pulled out of the water for repair. Even with the most sophisticated equipment, divers had limited capabilities, because of variables such as:
In the 1980s, divers used saturated and pressurized systems to do almost all well and subsea equipment intervention, inspection, and repair. If the divers could not complete the repair task and/or inspection, the blowout preventer (BOP) stack or other items had to be pulled out of the water for repair. Even with the most sophisticated equipment, divers had limited capabilities, because of variables such as:


* Water depth  
*Water depth
* Visibility  
*Visibility
* Currents  
*Currents
* Temperatures,  
*Temperatures,
* Bottom downtime
*Bottom downtime
* Sometimes, questionable safety standards
*Sometimes, questionable safety standards


Subsea television systems were, and still are, used to inspect and monitor hulls and subsea equipment by use of running down guidelines, but they can only view (not do) repairs or other physical tasks.  
Subsea television systems were, and still are, used to inspect and monitor hulls and subsea equipment by use of running down guidelines, but they can only view (not do) repairs or other physical tasks.


Starting in the 1990s, coinciding with the increase in subsea completions, well intervention with highly capable remotely operated vehicles (ROVs) has developed into a common third-party addition to a floating mobile offshore drilling unit (MODU).
Starting in the 1990s, coinciding with the increase in subsea completions, well intervention with highly capable remotely operated vehicles (ROVs) has developed into a common third-party addition to a floating mobile offshore drilling unit (MODU).


==ROV capabilities==
== ROV capabilities ==
Modern ROVs have the ability to “fly” by means of an umbilical that is attached to the transport cage (or “garage”). Once the ROV leaves its cage, it may traverse for approximately 100 ft. The operator, or pilot, controls the flight pattern and position of the ROV, so it will not become entangled in its own umbilical or other items.


Most ROVs have visual and recording capabilities, in addition to manipulator arms with various degrees of strength, feedback, and lifting capability. ROV technology has far exceeded water depth ratings of MODUs; the capabilities and reliability of these units have improved considerably. Common tasks include:
Modern ROVs have the ability to “fly” by means of an umbilical that is attached to the transport cage (or “garage”). Once the ROV leaves its cage, it may traverse for approximately 100 ft. The operator, or pilot, controls the flight pattern and position of the ROV, so it will not become entangled in its own umbilical or other items.


* Changing of wellhead sealing ring gaskets
Most ROVs have visual and recording capabilities, in addition to manipulator arms with various degrees of strength, feedback, and lifting capability. ROV technology has far exceeded water depth ratings of MODUs; the capabilities and reliability of these units have improved considerably. Common tasks include:
* Control of some functions on the BOP stack in an emergency
 
* Retrieval/installation of items on the wellhead or production hardware
*Changing of wellhead sealing ring gaskets
* Inspection, as well as inspections with the subsea television system  
*Control of some functions on the BOP stack in an emergency
*Retrieval/installation of items on the wellhead or production hardware
*Inspection, as well as inspections with the subsea television system


With the increase in the use of subsea completions to develop whole fields, ROVs have become an integral part of deepwater development. With subsea development, MODUs do the drilling and most of the completion, including:
With the increase in the use of subsea completions to develop whole fields, ROVs have become an integral part of deepwater development. With subsea development, MODUs do the drilling and most of the completion, including:


* Setting trees  
*Setting trees
* Flying leads  
*Flying leads
* Jumper hoses and pipelines  
*Jumper hoses and pipelines
* Umbilicals  
*Umbilicals
* Production risers  
*Production risers
* Production skids
*Production skids
* Templates
*Templates


All of the above require ROV intervention. When wells need to be worked over, ROVs are necessary and are usually launched off MODUs or intervention vessels working in conjunction with a MODU.  
All of the above require ROV intervention. When wells need to be worked over, ROVs are necessary and are usually launched off MODUs or intervention vessels working in conjunction with a MODU.


As ROVs have become more important in floating MODU operations, the size and space requirements have increased dramatically. For intervention and completions, it is not uncommon to have:
As ROVs have become more important in floating MODU operations, the size and space requirements have increased dramatically. For intervention and completions, it is not uncommon to have:


* Two ROV systems, requiring the storage and operating porch to be used as a work platform
*Two ROV systems, requiring the storage and operating porch to be used as a work platform
* Structural reinforcement for the deployment winch
*Structural reinforcement for the deployment winch
* Fendering to prevent the ROV from hitting the MODU columns/lower hull
*Fendering to prevent the ROV from hitting the MODU columns/lower hull
* Electrical power to support the unit (can be > 200 to 300 KVA)
*Electrical power to support the unit (can be > 200 to 300 KVA)
* [[MODU equipment and capabilities|Variable deck load (VDL)]]  
*[[MODU_equipment_and_capabilities|Variable deck load (VDL)]]
* Deck space  
*Deck space


This can amount to a considerable support system that the MODU must accommodate, so planning ahead is important. Not every MODU can accommodate the larger ROV systems from a weight (some times over 40 tons), space (2,500 square ft. or more), or power standpoint.
This can amount to a considerable support system that the MODU must accommodate, so planning ahead is important. Not every MODU can accommodate the larger ROV systems from a weight (some times over 40 tons), space (2,500 square ft. or more), or power standpoint.


==References==
== References ==
 
== Noteworthy papers in One Petro ==
 
Giuseppe Conte and Andrea Serrani 2001. Sensor Fusion Approach in Remotely Operated Vehicle Control, Offshore Technology Conference, 30 April-3 May 2001. 13252-MS. [http://dx.doi.org/10.4043/13252-MS http://dx.doi.org/10.4043/13252-MS].
 
Simpson, J. 1984. Remotely Operated Vehicles as Underwater Inspection and Maintenance Tools: An Operator's Viewpoint, European Petroleum Conference , 22-25 October 1984. 12976-MS. [http://dx.doi.org/10.2118/12976-MS http://dx.doi.org/10.2118/12976-MS]


==Noteworthy papers in One Petro==
== External links ==


Giuseppe Conte and Andrea Serrani 2001. Sensor Fusion Approach in Remotely Operated Vehicle Control, Offshore Technology Conference, 30 April-3 May 2001. 13252-MS. http://dx.doi.org/10.4043/13252-MS.
== See also ==


Simpson, J. 1984. Remotely Operated Vehicles as Underwater Inspection and Maintenance Tools: An Operator's Viewpoint, European Petroleum Conference , 22-25 October 1984. 12976-MS. http://dx.doi.org/10.2118/12976-MS
[[MODU_selection|MODU selection]]


==External links==
[[PEH:Offshore_Drilling_Units]]


==See also==
[[MODU selection]]


[[PEH:Offshore Drilling Units]]
[[Category:4.5.10 Remotely operated vehicles]]

Latest revision as of 13:39, 2 June 2015

Remotely operated vehicles (ROVs) have facilitated the development of oil and gas resources in deeper water. By enabling access to areas that divers could not safely reach, they have extended capabilities for handling more complex situations and operations in deeper water.

History

In the 1980s, divers used saturated and pressurized systems to do almost all well and subsea equipment intervention, inspection, and repair. If the divers could not complete the repair task and/or inspection, the blowout preventer (BOP) stack or other items had to be pulled out of the water for repair. Even with the most sophisticated equipment, divers had limited capabilities, because of variables such as:

  • Water depth
  • Visibility
  • Currents
  • Temperatures,
  • Bottom downtime
  • Sometimes, questionable safety standards

Subsea television systems were, and still are, used to inspect and monitor hulls and subsea equipment by use of running down guidelines, but they can only view (not do) repairs or other physical tasks.

Starting in the 1990s, coinciding with the increase in subsea completions, well intervention with highly capable remotely operated vehicles (ROVs) has developed into a common third-party addition to a floating mobile offshore drilling unit (MODU).

ROV capabilities

Modern ROVs have the ability to “fly” by means of an umbilical that is attached to the transport cage (or “garage”). Once the ROV leaves its cage, it may traverse for approximately 100 ft. The operator, or pilot, controls the flight pattern and position of the ROV, so it will not become entangled in its own umbilical or other items.

Most ROVs have visual and recording capabilities, in addition to manipulator arms with various degrees of strength, feedback, and lifting capability. ROV technology has far exceeded water depth ratings of MODUs; the capabilities and reliability of these units have improved considerably. Common tasks include:

  • Changing of wellhead sealing ring gaskets
  • Control of some functions on the BOP stack in an emergency
  • Retrieval/installation of items on the wellhead or production hardware
  • Inspection, as well as inspections with the subsea television system

With the increase in the use of subsea completions to develop whole fields, ROVs have become an integral part of deepwater development. With subsea development, MODUs do the drilling and most of the completion, including:

  • Setting trees
  • Flying leads
  • Jumper hoses and pipelines
  • Umbilicals
  • Production risers
  • Production skids
  • Templates

All of the above require ROV intervention. When wells need to be worked over, ROVs are necessary and are usually launched off MODUs or intervention vessels working in conjunction with a MODU.

As ROVs have become more important in floating MODU operations, the size and space requirements have increased dramatically. For intervention and completions, it is not uncommon to have:

  • Two ROV systems, requiring the storage and operating porch to be used as a work platform
  • Structural reinforcement for the deployment winch
  • Fendering to prevent the ROV from hitting the MODU columns/lower hull
  • Electrical power to support the unit (can be > 200 to 300 KVA)
  • Variable deck load (VDL)
  • Deck space

This can amount to a considerable support system that the MODU must accommodate, so planning ahead is important. Not every MODU can accommodate the larger ROV systems from a weight (some times over 40 tons), space (2,500 square ft. or more), or power standpoint.

References

Noteworthy papers in One Petro

Giuseppe Conte and Andrea Serrani 2001. Sensor Fusion Approach in Remotely Operated Vehicle Control, Offshore Technology Conference, 30 April-3 May 2001. 13252-MS. http://dx.doi.org/10.4043/13252-MS.

Simpson, J. 1984. Remotely Operated Vehicles as Underwater Inspection and Maintenance Tools: An Operator's Viewpoint, European Petroleum Conference , 22-25 October 1984. 12976-MS. http://dx.doi.org/10.2118/12976-MS

External links

See also

MODU selection

PEH:Offshore_Drilling_Units