You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Discounting and risking in production forecasting

PetroWiki
Jump to navigation Jump to search

Discounting and risking can help mitigate the effects of our less than perfect knowledge and model shortcomings. Discounting is a pragmatic measure reflecting that it is impossible to capture the full range of all factors contributing to forecast uncertainty.

Technical factors

As well as addressing some of the human factors, discounting can be used to reflect technical factors often inherent in modeling techniques such as:

  • Under-estimation of reservoir heterogeneity
  • Under-estimation of back-out and interference effects
  • Under-estimation of schedule uncertainty, especially in complex projects
  • Learning curve when applying new technology

Historical performance analysis

Discount factor must be determined by technical judgment and experience but primarily it must be anchored in historical performance analysis for the field in question, if available, and for analogue fields. That is to say that past under and over performance compared to predictions should guide the discount factor.

Application

Discount factors can be applied to forecasts in two ways:

  • Discount rates or decline of the forecast itself by a constant factor
  • Determine the root cause of the risk and adjust model parameters (such as reduced availability factor, higher skins, adjusting relperms) to achieve the desired effect.

The latter is preferred as it leads to improved models for future forecasts and better and more consistent discounting with analogue forecasts.

Excessive discounting

A decision to apply technical discounting should be an integral part of the process to develop consistent Low, Best and High Cases and should not be applied as an afterthought to individual cases. Excessive discounting applied to generated forecasts should always raise a red flag.

References

Noteworthy papers in OnePetro

Goodwin, N. 2015. Bridging the Gap Between Deterministic and Probabilistic Uncertainty Quantification Using Advanced Proxy Based Methods. Society of Petroleum Engineers. http://dx.doi.org/10.2118/173301-MS.

Landa, Jorge. 2007. “Assessment of Forecast Uncertainty in Mature Reservoirs”. SPE Distinguished Lecturer Program. http://www.spegcs.org/events/1066/.

Choudhary, M. K., Yoon, S., & Ludvigsen, B. E. 2007. Application of Global Optimization Methods for History Matching and Probabilistic Forecasting - Case Studies. Society of Petroleum Engineers. http://dx.doi.org/10.2118/105208-MS.

Zubarev, D. I. 2009. Pros and Cons of Applying Proxy-models as a Substitute for Full Reservoir Simulations. Society of Petroleum Engineers. http://dx.doi.org/10.2118/124815-MS.

Mohaghegh, S. D. 2006. Quantifying Uncertainties Associated With Reservoir Simulation Studies Using a Surrogate Reservoir Model. Society of Petroleum Engineers. http://dx.doi.org/10.2118/102492-MS.

Mohaghegh, S. D., Modavi, C. A., Hafez, H. H., Haajizadeh, M., Kenawy, M. M., & Guruswamy, S. 2006. Development of Surrogate Reservoir Models (SRM) For Fast Track Analysis of Complex Reservoirs. Society of Petroleum Engineers. http://dx.doi.org/10.2118/99667-MS.

Peng, C. Y., & Gupta, R. 2003. Experimental Design in Deterministic Modelling: Assessing Significant Uncertainties. Society of Petroleum Engineers. http://dx.doi.org/10.2118/80537-MS.

Schaaf, T., Coureaud, B., & Labat, N. 2008. Using Experimental Designs, Assisted History Matching Tools and Bayesian Framework to get Probabilistic Production Forecasts. Society of Petroleum Engineers. http://dx.doi.org/10.2118/113498-MS.

Osterloh, W. T. 2008. Use of Multiple-Response Optimization To Assist Reservoir Simulation Probabilistic Forecasting and History Matching. Society of Petroleum Engineers. http://dx.doi.org/10.2118/116196-MS.

Nandurdikar, N. S., & Wallace, L. 2011. Failure to Produce: An Investigation of Deficiencies in Production Attainment. Society of Petroleum Engineers. http://dx.doi.org/10.2118/145437-MS.


Noteworthy books

Society of Petroleum Engineers (U.S.). 2011. Production forecasting. Richardson, Tex: Society of Petroleum Engineers. WorldCat or SPE Bookstore

Ringrose, P., & Bentley, M. 2014. Reservoir model design: A practitioner's guide. http://www.worldcat.org/oclc/892733899.

External links

Production forecasts and reserves estimates in unconventional resources. Society of Petroleum Engineers. http://www.spe.org/training/courses/FPE.php

Production Forecasts and Reserves Estimates in Unconventional Resources. Society of Petroleum Engineers. http://www.spe.org/training/courses/FPE1.php

See also

Production forecasting glossary

Aggregation of forecasts

Challenging the current barriers to forecast improvement

Commercial and economic assumptions in production forecasting

Controllable verses non controllable forecast factors

Discounting and risking in production forecasting

Documentation and reporting in production forecasting

Empirical methods in production forecasting

Establishing input for production forecasting

Integrated asset modelling in production forecasting

Long term verses short term production forecast

Look backs and forecast verification

Material balance models in production forecasting

Probabilistic verses deterministic in production forecasting

Production forecasting activity scheduling

Production forecasting analog methods

Production forecasting building blocks

Production forecasting decline curve analysis

Production forecasting expectations

Production forecasting flowchart

Production forecasting frequently asked questions and examples

Production forecasting in the financial markets

Production forecasting principles and definition

Production forecasting purpose

Production forecasting system constraints

Quality assurance in forecast

Reservoir simulation models in production forecasting

Types of decline analysis in production forecasting

Uncertainty analysis in creating production forecasting

Uncertainty range in production forecasting

Using multiple methodologies in production forecasting

Category