You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


AFE: completion equipment

PetroWiki
Jump to navigation Jump to search

An authority for expenditures (AFE) would not be complete without defining and developing costs for the completion equipment used for the well. Defining what is needed is an important part of well planning.

Components of a completion equipment

The completion equipment consists of downhole tools related to the tubing string. These items include:

  • Packers
  • Seal assemblies
  • Flow couplings
  • Blast joints
  • Landing nipples

They are dependent primarily on tubing size and fluid content.

Packers

The packer is designed to divert formation fluids into the production tubing. It is selected according to production-casing size, bore size requirements, tensile loading, and seal-assembly type. In addition, H2S-serviceable packers contain seals that are approximately 100 times more costly than the standard rubbers.

Blast joints

Blast joints are thick-walled tubulars placed in the tubing string opposite the perforations to minimize the damage from erosion by the produced fluids. Their cost is dependent on tubing size and number of joints.

Seal assembly

The seal assembly is an important part of the completion equipment. The cost is affected by the required number of seal units, the connection type, and the pipe size.

References

See also

Completion systems

Authority for expenditures (AFE)

AFE:_location_preparation

AFE:_drilling_rig_and_tools

AFE:_drilling_fluids

AFE:_rental_equipment

AFE:_cementing

AFE:_support_services

AFE:_transportation

AFE:_supervision_and_administration

AFE:_tubulars

AFE:_wellhead_equipment

AFE:_projected_drilling_time

PEH:Introduction_to_Well_Planning

Noteworthy papers in OnePetro

External links