You must log in to edit PetroWiki. Help with editing
Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information
Rotary positive displacement compressors
Rotary compressors are positive displacement machines in which the compressing and displacement are affected by the positive action of rotating elements.
Types of rotary compressors
The two most common types of rotary positive displacement compressors are:
Vane compressors
The vane-type compressor consists of a cylindrical rotor with longitudinal slots in which radial sliding vanes are fitted. The rotor is positioned eccentrically within a cylindrical housing. The spaces between adjacent vanes form pockets of decreasing volume from a fixed inlet port to a fixed discharge port. Compressor inlet and discharge valves are not employed in the design. A vane compressor always compresses the gas to the design pressure defined by the manufacturer, regardless of the pressure in the system in which the compressor is discharging.
Screw compressors
The screw compressor, also known as a helical-lobe or spiral-lobe compressor, is a positive displacement rotary design that compresses gas between intermeshing helical lobes and chambers in the compressor housing. Screw compressors do not use valves. Their compression ratio is determined by the wrap angle of the lobes and the location of the opening edges of the discharge port. Of the various compressor types, screw compressors are best able to accommodate liquid carryover.
References
Use this section for citation of items referenced in the text to show your sources. [The sources should be available to the reader, i.e., not an internal company document.]
Noteworthy papers in OnePetro
Use this section to list papers in OnePetro that a reader who wants to learn more should definitely read
External links
Use this section to provide links to relevant material on websites other than PetroWiki and OnePetro